A-weighting is recommended for all sound levels despite fitting low levels best

Evidence

In order to have a better, yet relatively simple, measure of the perceived level of sound, the concept of sound level is defined as a measure that is weighted with frequency so that the level roughly approximates the frequency sensitivity of hearing. Four different weighting curves are defined: A, B, C, and D, as shown in Figure 9.3. The A-weighted sound level is commonly used in noise measurements to characterize the perceived level and the risk of hearing loss. The A weighting slightly emphasizes the levels at mid frequencies and attenuates them at low and high frequencies. When the weighting curve is compared with the inverted equal-loudness curves, it is easy to see that the A weighting is just a very rough estimate. Technical simplicity and extensive use in practice are its advantages. — Ville Pulkki, Matti Karjalainen, Communication Acoustics- An…, 988 (#expands, via linked claim)

Categorization

• XREF: connects to: A-weighting, the environmental sound standard, is seriously flawed yet persists; A-weighting can miss dominant low-frequency energy in broadband sounds; ISO standardized loudness-based noise metrics because A-weighting proved inadequate (+9 more)

Related

• A-weighting can miss dominant low-frequency energy in broadband sounds (similarity 0.95)
• Loudness meters use frequency weightings as a compromise because ear response varies with level (similarity 0.94)
• ISO standardized loudness-based noise metrics because A-weighting proved inadequate (similarity 0.94)
• A-weighted decibels are a rough practical approximation of perceived loudness (similarity 0.93)
• A-weighted sound level approximates perceived loudness only crudely, yet remains the noise-measurement standard. (similarity 0.92)
• A-weighted dB values misrepresent perceived loudness for complex sounds. (similarity 0.92)
• A-weighted decibels better predict hearing damage than unweighted sound pressure level. (similarity 0.91)
• A-weighted sound pressure level misrepresents the loudness of broadband noises (similarity 0.90)
• Loudness scales with frequency squared, requiring large amplitude at low frequencies (similarity 0.88)
• Sound measurement must be frequency-weighted because ears are not uniformly sensitive (similarity 0.88)
• Equal-loudness-contour weighting schemes failed as loudness meters (similarity 0.88)
• C-weighting captures low frequencies better at high sound pressures (similarity 0.87)
• Loudness curves from anechoic pure tones fail on real broadband program material (similarity 0.87)
• No single frequency-weighting can accurately meter loudness at all levels (similarity 0.86)
• A simple high-pass filter can replace elaborate loudness models (similarity 0.86)

Broader Connections

• Low-frequency tones become relatively louder as level increases. #qualifies (0.85)
• A-weighting can miss dominant low-frequency energy in broadband sounds #expands (0.82)
• A-weighted decibels are a rough practical approximation of perceived loudness #expands (0.82) — Ville Pulkki, Matti Karjalainen, Communication Acoustics- An…, 988
• Sound pressure level is the standard because it matches hearing #contradicts (0.80)
• A-weighted dB values misrepresent perceived loudness for complex sounds. #corroborates (0.80) — Professor Dr.-Ing. Hugo Fastl, Professor Dr.-Ing. Eberhard, Psychoacoustics- Facts and Models, 1176
• A-weighted sound pressure level misrepresents the loudness of broadband noises #corroborates (0.78)
• Loudness meters use frequency weightings as a compromise because ear response varies with level #expands (0.78)
• ISO standardized loudness-based noise metrics because A-weighting proved inadequate #complicates (0.75)
• Sound measurement must be frequency-weighted because ears are not uniformly sensitive #expands (0.75)
• A-weighted decibels better predict hearing damage than unweighted sound pressure level. #qualifies (0.72) — Jennifer Lentz, Psychoacoustics- Perception of Normal…, 757