Wide-band membrane absorbers shrink non-environment rooms to fifteen square meters

Evidence

These rooms require wide-band absorbers as shown in Figure 7.12. These absorbers can take up a considerable amount of space. As one can see in Figure 7.12, the absorbers can occupy more than 50% of the volume. However, it is possible to use wide-band membrane absorbers, as discussed in Chapter 6, with a structure similar to that shown in Figure 6.48 with a limp membrane in place of the perforated sheet. Using this type of absorber it is possible to achieve sufficient wide-band absorption with a depth of 30 cm, which allows this technique to be applied in much smaller rooms whose area is approximately 15 m2. β€” David Howard, Jamie Angus, coustics and Psychoacoustics, 2295

Categorization

  • XREF: The limp-membrane wide-band absorber ties back to the Chapter 6 absorber material on membrane absorbers. β€” connects to: Wide-band membrane absorbers achieve dead-room acoustics in just 30 cm depth.; Deep porous absorbers give flat wideband absorption at the cost of space β€” David Howard, Jamie Angus, coustics and Psychoacoustics, 2110; Membrane absorbers deliver wide-band absorption in only 30 cm of depth. β€” David M. Howard, Jamie Angus, Acoustics and Psychoacoustics, 2313 (+3 more)

Broader Connections